Home-made Billy Can

I spent the best part of my day yesterday (Sunday), hiking through out local woods with my buddy Andy, so that I could practice with and test out some of my gear and take a few photographs for some blog posts that I had in mind.  As many or my regular readers know, I am a die-hard ultralighter, always looking to shave a few ounces off the weight of my pack and gear. However, yesterday instead of taking along my favorite alcohol stove and cooking kit, I thought I'd try a new approach based more on bushcraft skills than ultralight backpacking.

Home-made Billy Can

A few weeks ago I made Billy can out of an old Oatmeal can, a wire coat hanger, and a $1.00 wooden handle I had lying around. It's pretty crude but it seems to work just fine. I drilled two small holes on either side of the tin towards the top, then cut and bent the wire coat hanger into a handle shape and poked both ends inside the can. I bent the wire inside the can so that it couldn't pop back out.  Next I drilled a small hole in the center of the lid and screwed on a small wooden handle that I had left over from another project. The result is a relatively light weight Billy can style cooking container that can be hanged above a fire as shown.

Bushcraft Tripod & Billy Can

After clearing a good sized patch of ground of leaves and lighting my fire, I got to work making a stand for the Billy can.  Off to one side, away from the fire, I made a simple bushcraft adjustable tripod out of three long branches and tied them at the top using a clove hitch. To make the pot holder, I cut a shorter branch with a small arm that could be used to hook over the top of the tripod and then cut a notch to hold the handle of the Billy can towards the bottom of the holder.

Home-made Billy Can

The result was a tripod that held my can firmly but which could be easily adjusted for heat/height by simply spreading the legs apart or pulling them together.  Despite taking a few minutes longer than setting up my alcohol stove, this set up was very easy to do and boiled my 2 cups of water very efficiently in about 7 minutes.  What I like about this approach is that I used materials that were readily available and only had to carry in my home-made Billy can and food.

I'm now thinking of investing in a small commercial Billy can like the Zebra Cans or Tatonka Cans that I can use just like my home-made one for cooking along the trail. Of course the downside is that in order to cook I would have to start a fire, but my fire making skills are pretty good and I can usually get one going quickly even in damp conditions.  There's also the issue with soot on the outside of the can, but that's easily cleaned up - just a pain.

I'm not sure whether I'll completely abandon the alcohol stove just yet, it's more likely that I'll just swap out my GSI Soloist pot for a small Billy can and have the best of both worlds.

Quick update: Here's a few seconds of video just for fun :)

So what type of trail cooking pot do you use, and have you tried using Billy cans with open fires? I'd love to hear from you.

Fixed Blade Knife Comparison

Rite in the Rain and a No. 2 Pencil